VEHICLE DYNAMICS CONTROL (VDC) > General Description
SPECIFICATION
Item | Specification or identification | |||
ABS wheel speed sensor | ABS wheel speed sensor gap (for reference) | Front | 0.77 — 1.43 mm (0.030 — 0.056 in) | |
Rear | 0.44 — 1.76 mm (0.017 — 0.069 in) | |||
Identifications of harness (symbol) | Front | RH | Z1 | |
LH | Z2 | |||
Rear | RH | Z5 | ||
LH | Z6 | |||
VDCCM&H/U identification | Models without EyeSight | XQ | ||
Models with EyeSight | CZ |
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transmission Mounting SystemINSTALLATION1. PITCHING STOPPER1. Install the pitching stopper.Tightening torque:T1: 50 N·m (5.1 kgf-m, 36.9 ft-lb)T2: 58 N·m (5.9 kgf-m, 42.8 ft-lb)2. Install the air intake boot assembly. Air Intake Boot > ...
Note
LIGHTING SYSTEM > Clearance Light and Illumination Light SystemNOTEFor operation procedures of each component of the clearance light & illumination light system, refer to the respective sections.• Combination switch (light): Combination Switch (Light)">• Parking light bul ...
Removal
MECHANICAL(H4DO) > Crank PulleyREMOVALNOTE:When replacing a single part, perform the work with the engine assembly installed to body.1. When working on the vehicleNOTE:When working on the vehicle, perform the following steps also.(1) Remove the radiator main fan & fan motor assembly and radia ...