STARTING/CHARGING SYSTEMS(H4DO) > General Description
SPECIFICATION
Item | Specifications | ||||
Vehicle model | CVT | MT | |||
Starter | Type | Reduction type | |||
Model | M000T38571 | M000T33176 | |||
Manufacturer | Mitsubishi Electric | ||||
Voltage and output | 12 V — 1.2 kW | 12 V — 1.0 kW | |||
Direction of rotation | Counterclockwise (when observed from pinion) | ||||
Number of pinion teeth | 9 | 8 | |||
Armature commutator runout | Standard | 0.05 mm (0.0020 in) | |||
Limit | 0.10 mm (0.0039 in) | ||||
Armature depth of segment mold | Standard | 0.50 mm (0.020 in) | |||
Brush length | Standard | 12.3 mm (0.484 in) | |||
Limit | 7.0 mm (0.276 in) | ||||
Brush spring force | Standard | 15.9 — 19.5 N (1.62 — 1.99 kgf, 3.57 — 4.38 lbf) | |||
Limit | 2.5 N (0.25 kgf, 0.56 lbf) | ||||
No-load characteristics | Voltage | 11 V | |||
Current | 90 A or less | 95 A or less | |||
Generator | Type | Rotating-field three-phase type, voltage regulator built-in type, each with load response control system | |||
Model | A2TX5081 | ||||
Manufacturer | Mitsubishi Electric | ||||
Voltage and output | 12 V — 130 A | ||||
Polarity on ground side | Negative | ||||
Direction of rotation | Clockwise (when observed from pulley side) | ||||
Stator connection | 3-phase type | ||||
Output current | 1,500 r/min — 50 A or more 2,500 r/min — 111 A or more 5,000 r/min — 133 A or more | ||||
Regulated voltage | 14.1 — 14.8 V [20°C (68°F)] | ||||
Rotor slip ring outer diameter | Standard | 22.7 mm (0.894 in) | |||
Limit | 22.1 mm (0.870 in) | ||||
Brush length | Standard | 22.5 mm (0.886 in) | |||
Limit | 5.0 mm (0.197 in) | ||||
Battery | Type | 55D23L/75D23L | |||
Nominal capacity | 5 HR: 40 Ah [25°C (77°F)] (55D23L) / 5 HR: 53 Ah [25°C (77°F)] (75D23L) | ||||
Nominal voltage | 12 V | ||||
CCA | 390 A (55D23L) / 470 A (75D23L) |
Removal
CLUTCH SYSTEM > Master CylinderREMOVALCAUTION:• Be careful not to spill the brake fluid. Brake fluid spilled on the vehicle body will harm the paint surface; wash it off with water and wipe clean quickly if spilled.• Before handling the airbag system components, refer to “CAUTIO ...
Clear memory mode Operation
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Clear Memory ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Selec ...
Basic diagnostic procedure Procedure
ENGINE (DIAGNOSTICS)(H4DO) > Basic Diagnostic ProcedurePROCEDURE1. ENGINESTEPCHECKYESNO1.CHECK ENGINE START FAILURE.1) Ask the customer when and how the trouble occurred using the interview check list. Check List for Interview > CHECK">2) Start the engine.Does the engine start? Basic ...