POWER ASSISTED SYSTEM (POWER STEERING) > General Description
SPECIFICATION
Whole system
Minimum turning radius | m (ft) | 5.3 (17.4) |
Steering angle | Inner wheel | 38.2°±1.5° |
Outer wheel | 33.6°±1.5° | |
Steering wheel diameter | mm (in) | 375 (14.76) |
Lock-to-lock revolution number | 2.8 |
Gearbox
Type | Rack and Pinion, Integral |
Backlash | 0 (automatic adjusting) |
Power steering motor
Motor (Temperature 20°C (68°F)) | Rated voltage | V | 12 |
Rated torque | N·m (kgf-m, ft-lb) | 4.5 (0.46, 3.31) | |
Rated revolution speed | r/min | 1,140 | |
Rated current | A | 85 | |
Rated output | W | 561 |
Steering wheel
Free play | mm (in) | 17 (0.67) or less |
Column assembly - steering
Clearance Between steering wheel and cover assembly - column | mm (in) | 4 — 6 (0.16 — 0.24) |
Steering gearbox
Sliding resistance | N (kgf, lbf) | 303 (31, 68) or less Difference between right and left sliding resistance: 20% or less | |
Rack shaft play in the radial direction | mm (in) | Right-turn steering | Both amplitudes: 0.6 (0.024) or less |
Left-turn steering | Both amplitudes: 0.4 (0.016) or less | ||
Input shaft play | mm (in) | In radial direction | Both amplitudes: 0.18 (0.0071) or less |
In axial direction | 0.27 (0.0106) or less | ||
Rotational resistance | N (kgf, lbf) | Maximum allowable value: 18.0 (1.8, 4.0) or less Difference between right and left sliding resistance: 20% or less |
Steering effort (with power steering assist)
At standstill with engine idling on paved road | N (kgf, lbf) | 29.4 (3.0, 6.6) or less |
At standstill with engine stalled on paved road | N (kgf, lbf) | 294.2 (30, 66.2) or less |
Inspection
SEATS > Front SeatINSPECTION1. SEAT COVERCheck that there is no tear or fray on the cover COMPL - front backrest and the cover - front cushion.NOTE:For model with side airbag, if the door side of the cover COMPL - front backrest is torn or frayed, the side airbag may not be deployed properly. In ...
Dtc b1826 open in side airbag lh
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1826 OPEN IN SIDE AIRBAG LHDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Side airbag harness (LH) circuit is open.• Side airbag module (LH) is faulty.• Airbag control modu ...
Compression Inspection
MECHANICAL(H4DO) > CompressionINSPECTIONCAUTION:After warming-up, engine becomes very hot. Be careful not to burn yourself during measurement.1. Turn the ignition switch to OFF.2. After warming-up the engine, turn the ignition switch to OFF.3. Make sure that the battery is fully charged.4. Check ...