MECHANICAL(H4DO) > General Description
SPECIFICATION
Engine | Model | 2.0 L | ||||
Cylinder arrangement | Horizontally opposed, liquid cooled, 4-cylinder, 4-stroke gasoline engine | |||||
Valve system mechanism | Chain driven, double overhead camshaft, 4-valve/cylinder | |||||
Bore ? Stroke | mm (in) | 84.0 ? 90.0 (3.31 ? 3.54) | ||||
Displacement | cm3 (cu in) | 1,995 (121.7) | ||||
Compression ratio | 10.5 | |||||
Compression pressure (at 200 — 300 r/min) | kPa (kg/cm2, psi) | Standard | 1,050 — 1,400 (11 — 14, 152 — 203) | |||
Number of piston rings | Compression ring: 2 Oil ring: 1 | |||||
Intake valve timing | Open | Max. retard | ATDC 25° | |||
Min. advance | BTDC 43° | |||||
Close | Max. retard | ABDC 85° | ||||
Min. advance | ABDC 17° | |||||
Exhaust valve timing | Open | Max. retard | ABDC 3° | |||
Min. advance | BBDC 52° | |||||
Close | Max. retard | ATDC 47° | ||||
Min. advance | BTDC 8° | |||||
Cam clearance | mm (in) | Intake | Standard | 0.13+0.02 −0.03 (0.0051+0.0008 −0.0012) | ||
Exhaust | Standard | 0.22±0.02 (0.0087±0.0008) | ||||
Idle speed (For CVT model, select lever in “P” or “N” range. For MT model, gear shift lever in neutral position.) | r/min | No load | Standard | 650±100 | ||
A/C ON | Standard | 800 — 900±50 | ||||
Ignition order | 1 > 3 > 2 > 4 | |||||
Ignition timing | BTDC/{r/min} | Standard | CVT model: 16°±10°/650 | |||
MT model: 12°±10°/650 |
NOTE:
OS: Oversize US: Undersize
Camshaft | Bending | mm (in) | Limit | 0.020 (0.0008) | |||||
Cam lobe height | mm (in) | Intake | Standard | 40.34 — 40.44 (1.588 — 1.592) | |||||
Exhaust | Standard | 39.66 — 39.76 (1.561 — 1.565) | |||||||
Cam base circle diameter | mm (in) | Standard | 34.0 (1.339) | ||||||
Journal outer diameter | mm (in) | Standard | 25.946 — 25.963 (1.0215 — 1.0222) | ||||||
Thrust clearance | mm (in) | Standard | 0.068 — 0.116 (0.0027 — 0.0047) | ||||||
Oil clearance | mm (in) | Standard | 0.037 — 0.072 (0.0015 — 0.0028) | ||||||
Cylinder head | Warpage (mating surface with cylinder block) | mm (in) | Limit | 0.020 (0.0008) | |||||
Grinding limit | mm (in) | To 98.4 (3.874) | |||||||
Height | mm (in) | Standard | 98.5 (3.878) | ||||||
Valve & valve guide | Valve overall length | mm (in) | Intake | 104.95 (4.132) | |||||
Exhaust | 96.5 (3.799) | ||||||||
Valve head edge thickness | mm (in) | Intake | Standard | 0.8 — 1.2 (0.031 — 0.047) | |||||
Exhaust | Standard | 1.0 — 1.4 (0.039 — 0.055) | |||||||
Valve stem outer diameter | mm (in) | Intake | Standard | 5.455 — 5.470 (0.2148 — 0.2154) | |||||
Exhaust | Standard | 5.445 — 5.460 (0.2144 — 0.2150) | |||||||
Valve guide inner diameter | mm (in) | Standard | 5.500 — 5.512 (0.2165 — 0.2170) | ||||||
Clearance between valve and valve guide | mm (in) | Intake | Standard | 0.030 — 0.057 (0.0012 — 0.0022) | |||||
Exhaust | Standard | 0.040 — 0.067 (0.0016 — 0.0026) | |||||||
Valve guide protrusion amount | mm (in) | Standard | 11.4 — 11.8 (0.449 — 0.465) | ||||||
Valve & valve shim | Valve stem end outer diameter | mm (in) | Intake | Standard | 5.455 — 5.470 (0.2148 — 0.2154) | ||||
Exhaust | Standard | 5.445 — 5.460 (0.2144 — 0.2150) | |||||||
Valve shim inner diameter | mm (in) | Standard | 5.500 — 5.560 (0.2165 — 0.2189) | ||||||
Clearance between valve and valve shim | mm (in) | Intake | Standard | 0.030 — 0.105 (0.0012 — 0.0041) | |||||
Exhaust | Standard | 0.040 — 0.115 (0.0016 — 0.0045) | |||||||
Valve seat | Seating width between valve and valve seat | mm (in) | Intake | Standard | 0.8 — 1.6 (0.031 — 0.063) | ||||
Exhaust | Standard | 1.1 — 1.7 (0.043 — 0.067) | |||||||
Seating angle between valve and valve seat | 45° | ||||||||
Seating position between valve and valve seat | Valve face center | ||||||||
Valve spring | Free length | mm (in) | Standard | MT model: 41.06 (1.617) | |||||
CVT model: 41.68 (1.641) | |||||||||
Tension/spring height | N (kgf, lb)/mm (in) | Set | Standard | 182 — 210 (18.56 — 21.41, 40.92 — 47.22)/33.0 (1.299) | |||||
Lift | Standard | MT model: 552 — 610 (56.29 — 62.20, 124.11 — 137.15)/22.0 (0.866) | |||||||
CVT model: 502 — 554 (51.19 — 56.49, 112.87 — 124.56)/22.0 (0.866) | |||||||||
Squareness | Standard | 2.5°, 1.8 mm (0.071 in) or less | |||||||
Cylinder block & piston | Cylinder block warpage (Mating surface with cylinder head) | mm (in) | Limit | 0.025 (0.0010) | |||||
Grinding limit of cylinder block | mm (in) | To 204.9 (8.067) | |||||||
Height of cylinder block | mm (in) | Standard | 205.0 (8.071) | ||||||
Inner diameter of cylinder liner | mm (in) | Cylinder bore size mark A | Standard | 84.005 — 84.015 (3.3073 — 3.3077) | |||||
Cylinder bore size mark B | Standard | 83.995 — 84.005 (3.3069 — 3.3073) | |||||||
Cylindricality of cylinder liner | mm (in) | Limit | 0.030 (0.0012) | ||||||
Out-of-roundness of cylinder liner | mm (in) | Limit | 0.030 (0.0012) | ||||||
Piston grade point | mm (in) | 38.0 (1.50) | |||||||
Piston outer diameter | mm (in) | Standard Size | Grade A | Standard | 83.975 — 83.985 (3.3061 — 3.3065) | ||||
Grade B | Standard | 83.965 — 83.975 (3.3057 — 3.3061) | |||||||
0.25 (0.0098) OS | Standard | 84.215 — 84.235 (3.3155 — 3.3163) | |||||||
0.50 (0.0197) OS | Standard | 84.465 — 84.485 (3.3254 — 3.3262) | |||||||
Clearance between cylinder liner and piston | mm (in) | Standard | 0.020 — 0.040 (0.0008 — 0.0016) | ||||||
Inner diameter of cylinder liner boring limit (diameter) | mm (in) | To 84.505 (3.3270) | |||||||
Piston and piston pin | Degree of fit | Piston pin must be fitted into position with thumb at 20°C (68°F). | |||||||
Clearance between piston and piston pin | mm (in) | Standard | 0.004 — 0.008 (0.0002 — 0.0003) | ||||||
Piston ring | Closed gap | mm (in) | Compression ring | Top ring | Standard | 0.20 — 0.35 (0.0079 — 0.0138) | |||
Second ring | Standard | 0.40 — 0.50 (0.0157 — 0.0197) | |||||||
Oil ring (Upper rail and lower rail) | Standard | 0.10 — 0.35 (0.0039 — 0.0138) | |||||||
Clearance between compression ring and piston | mm (in) | Top ring | Standard | 0.040 — 0.080 (0.0016 — 0.0031) | |||||
Second ring | Standard | 0.030 — 0.070 (0.0012 — 0.0028) | |||||||
Connecting rod and connecting rod bearing | Bend or twist per 100 mm (3.94 in) in length | mm (in) | Limit | 0.10 (0.0039) | |||||
Thrust clearance | mm (in) | Standard | 0.070 — 0.330 (0.0028 — 0.0130) | ||||||
Connecting rod bearing thickness (at center) | mm (in) | Standard size | Standard | 1.492 — 1.508 (0.0587 — 0.0594) | |||||
0.03 (0.0012) US | Standard | 1.511 — 1.515 (0.0595 — 0.0596) | |||||||
0.05 (0.0020) US | Standard | 1.521 — 1.525 (0.0599 — 0.0600) | |||||||
0.25 (0.0098) US | Standard | 1.621 — 1.625 (0.0638 — 0.0640) | |||||||
Oil clearance | mm (in) | Standard | 0.017 — 0.047 (0.0007 — 0.0019) | ||||||
Piston pin & connecting rod bushing | Clearance between piston pin and connecting rod bushing | mm (in) | Standard | 0.004 — 0.026 (0.0002 — 0.0010) | |||||
Crankshaft and crankshaft bearing | Bending | mm (in) | Limit | 0.035 (0.0014) | |||||
Crankshaft pin | Cylindricality | mm (in) | Limit | 0.006 (0.0002) | |||||
Out-of-roundness | mm (in) | Limit | 0.005 (0.0002) | ||||||
Grinding limit (dia.) | mm (in) | To 47.726 (1.8790) | |||||||
Crankshaft journal | Cylindricality | mm (in) | Limit | 0.006 (0.0002) | |||||
Out-of-roundness | mm (in) | Limit | 0.005 (0.0002) | ||||||
Grinding limit (dia.) | mm (in) | To 67.735 (2.6667) | |||||||
Crankshaft pin outer diameter | mm (in) | Standard size | Standard | 47.976 — 48.000 (1.8888 — 1.8898) | |||||
0.03 (0.0012) US | Standard | 47.946 — 47.970 (1.8876 — 1.8886) | |||||||
0.05 (0.0020) US | Standard | 47.926 — 47.950 (1.8868 — 1.8878) | |||||||
0.25 (0.0098) US | Standard | 47.726 — 47.750 (1.8790 — 1.8799) | |||||||
Crankshaft journal outer diameter | mm (in) | Standard size | Standard | 67.985 — 68.003 (2.6766 — 2.6773) | |||||
0.03 (0.0012) US | Standard | 67.955 — 67.979 (2.6754 — 2.6763) | |||||||
0.05 (0.0020) US | Standard | 67.935 — 67.959 (2.6746 — 2.6755) | |||||||
0.25 (0.0098) US | Standard | 67.735 — 67.759 (2.6667 — 2.6677) | |||||||
Crankshaft bearing thickness (at center) | mm (in) | #1, #2, #3, #4 | Standard size | Standard | 2.498 — 2.513 (0.0983 — 0.0989) | ||||
0.03 (0.0012) US | Standard | 2.519 — 2.522 (0.0992 — 0.0993) | |||||||
0.05 (0.0020) US | Standard | 2.529 — 2.532 (0.0996 — 0.0997) | |||||||
0.25 (0.0098) US | Standard | 2.629 — 2.632 (0.1035 — 0.1036) | |||||||
#5 | Standard size | Standard | 2.496 — 2.511 (0.0983 — 0.0989) | ||||||
0.03 (0.0012) US | Standard | 2.517 — 2.520 (0.0991 — 0.0992) | |||||||
0.05 (0.0020) US | Standard | 2.527 — 2.530 (0.0995 — 0.0996) | |||||||
0.25 (0.0098) US | Standard | 2.627 — 2.630 (0.1034 — 0.1035) | |||||||
Thrust clearance | mm (in) | Standard | 0.130 — 0.308 (0.00512 — 0.01213) | ||||||
Oil clearance | mm (in) | Standard | 0.013 — 0.031 (0.00051 — 0.00122) |
Refrigerant leak check Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Refrigerant Leak CheckINSPECTION1. Attach the manifold gauge set.Preparation tool:Manifold gauge set(1) Check that all valves are fully closed.(2) Install the low/high pressure hoses to the service ports on the low/high pressure sides of the vehicle resp ...
Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Throttle BodyREMOVAL1. Disconnect the ground cable from battery.2. Lift up the vehicle.3. Remove the under cover. Front Under Cover > REMOVAL">4. Drain approximately 3.0 L (3.2 US qt, 2.6 Imp qt) of coolant. Engine Coolant > REPLACEMENT"& ...
Control screen and audio panel
Select to display the audio source
selection screen.
Select to display the play mode
currently selected. Refer to "Select
play mode"
Select to display iPod List. Refer to
"iPod settings"
Shows progress.
Turn to adjust volume.
Press to turn the audio system on/off.
Turn to ...