LUBRICATION(H4DO) > General Description
SPECIFICATION
Lubrication method | Forced lubrication | ||||
Oil pump | Pump type | Trochoid type | |||
Number of teeth | Inner rotor | 11 | |||
Outer rotor | 12 | ||||
Outer rotor diameter ? Thickness | mm (in) | 77 ? 12 (3.03 ? 0.47) | |||
Performance (Oil temperature 120°C (248°F)) | 600 r/min | Discharge pressure | kPa (kg/cm2, psi) | 40 (0.4, 5.8) | |
Discharge rate | L (US qt, Imp qt)/min | 5.8 (6.1, 5.1) or more | |||
6,000 r/min | Discharge pressure | kPa (kg/cm2, psi) | 323 (3.3, 46.8) | ||
Discharge rate | L (US qt, Imp qt)/min | 55 (58.1, 48.4) or more | |||
Relief valve working pressure (2-step relief) | 1st opening pressure | kPa (kg/cm2, psi) | 150 (1.5, 21.7) | ||
Main opening pressure | kPa (kg/cm2, psi) | 570 (5.8, 82.6) | |||
Oil filter | Filter type | Full-flow filter type | |||
Filtration area | cm2 (sq in) | Outer diameter: 68 mm (2.68 in) (black) | 1,100 (171) | ||
Outer diameter: 67.4 mm (2.65 in) (blue) | 867 (134.3) | ||||
By-pass valve opening pressure | kPa (kg/cm2, psi) | 160 (1.6, 23.2) | |||
Outer diameter ? Width | mm (in) | Outer diameter: 68 mm (2.68 in) (black) | 68 ? 85 (2.68 ? 3.35) | ||
Outer diameter: 67.4 mm (2.65 in) (blue) | 67.4 ? 87.1 (2.65 ? 3.43) | ||||
Installation screw specifications | M 20 ? 1.5 | ||||
Oil pressure switch | Type | Immersed contact point type | |||
Operating voltage | 12 V | ||||
Warning light operating pressure | kPa (kg/cm2, psi) | 14.7 (0.1, 2.1) | |||
Proof pressure | kPa (kg/cm2, psi) | 981 (10, 142.2) | |||
Engine oil | Total capacity (at overhaul) | L (US qt, Imp qt) | 5.7 (6.0, 5.0) | ||
When replacing engine oil and oil filter | L (US qt, Imp qt) | 4.8 (5.1, 4.2) | |||
When replacing engine oil only | L (US qt, Imp qt) | 4.6 (4.9, 4.0) |
Specified oil:
CAUTION:
• Use 0W-20 (synthetic oil).
• It is acceptable to fill an engine with oil of another brand when replacing the oil, but make sure to use the following engine oil specified by Subaru.
NOTE:
The proper viscosity oil helps the engine maintain its ideal temperature, and cranking speed increased by reducing viscosity friction in hot condition.
Engine oil standard | SAE viscosity No. | ||
Those with SN “Resource Conserving” logo in case of API standard.
or
Those with GF-5 “starburst mark” displayed on top of the container in case of ILSAC standard.
0W-20 (synthetic oil)
Inspection
EyeSight (DIAGNOSTICS) > General DescriptionINSPECTION1. BATTERYCheck the battery. Battery">2. WINDSHIELD GLASS AND DASHBOARDRemove the windshield glass and dashboard in front of the stereo camera.Standard:There must be no oil film, dirt, scratch or fogging that obstructs the forward vis ...
Inspection
CONTROL SYSTEMS > AT Shift Lock Control SystemINSPECTION1. SHIFT LOCK OPERATION• Model without push button ignition switchSTEPCHECKYESNO1.CHECK COMMUNICATION OF SUBARU SELECT MONITOR.1) Turn the ignition switch to ON.2) Using the Subaru Select Monitor, check whether communication to all sys ...
Installation
LIGHTING SYSTEM > Front Fog Light AssemblyINSTALLATIONCAUTION:Install the mud guard - front so that the front end of the mud guard (b) comes outside the bumper face - front (a).1. Install each part in the reverse order of removal.Tightening torque:Fog light assembly - front: 7.5 N·m (0.76 ...