Subaru Crosstrek Service Manual: Specification
COOLING(H4DO) > General Description
SPECIFICATION
Cooling system | Electric fan + forced engine coolant circulation system | |||||
Total engine coolant capacity | L (US qt, Imp qt) | CVT model | Approx. 8.4 (8.9, 7.4) | |||
MT model | Approx. 8.0 (8.5, 7.0) | |||||
Water pump | Type | Centrifugal impeller type | ||||
Discharge performance | Discharge rate | L (US gal, Imp gal)/min | 230 (60.8, 50.6) | |||
Pump speed — Discharge pressure | 6,600 r/min — 88 kPa (9 mAq) | |||||
Engine coolant temperature | 80°C (176°F) | |||||
Impeller diameter | mm (in) | 60 (2.36) | ||||
Number of impeller vanes | 7 | |||||
Pump pulley diameter | mm (in) | 130 (5.12) | ||||
Thermostat | Type | Wax pellet type | ||||
Starting temperature to open | Engine side | 90 — 94°C (194 — 201°F) | ||||
CVTF cooler (with warmer feature) side (CVT model) | 48 — 52°C (118 — 126°F) | |||||
Fully opens | Engine side | 100°C (212°F) | ||||
CVTF cooler (with warmer feature) side (CVT model) | 63°C (145°F) | |||||
Valve lift | mm (in) | Engine side | 8.0 (0.315) or more | |||
CVTF cooler (with warmer feature) side (CVT model) | 6.0 (0.236) or more | |||||
Valve opening size | mm (in) | Engine side | 32 (1.26) | |||
CVTF cooler (with warmer feature) side (CVT model) | 22 (0.87) | |||||
Radiator fan | Motor input | Main fan | W | 120 | ||
Sub fan | W | 120 | ||||
Fan diameter / Blade | Main fan | 320 mm (12.6 in)/9 | ||||
Sub fan | 320 mm (12.6 in)/11 | |||||
Radiator | Type | Down flow, pressure type | ||||
Core dimensions | Width ? Height ? Thickness | mm (in) | 687.4 ? 340 ? 16 (27.06 ? 13.39 ? 0.63) | |||
Pressure range in which cap valve is open | kPa (kg/cm2, psi) | Positive pressure side | Standard | 93 — 123 (0.95 — 1.25, 14 — 18) | ||
Limit | 83 (0.85, 12) | |||||
Negative pressure side | Standard | −1.0 to −4.9 or less (−0.01 — −0.05, −0.1 — −0.7) | ||||
Fins | Corrugated fin type | |||||
Reservoir tank | Capacity | L (US qt, Imp qt) | 0.45 (0.48, 0.40) | |||
Recommended materials | Item number | Alternative | |
Coolant | SUBARU SUPER COOLANT (concentrated type) | — | — |
SUBARU SUPER COOLANT (diluted type) | K0670Y0001 | ||
Water for dilution | Distilled water | — | Soft water or tap water |
Cooling system protective agent | Cooling system conditioner | SOA345001 | — |
Caution
COOLING(H4DO) > General DescriptionCAUTION• Prior to starting work, pay special attention to the following:1. Always wear work clothes, a work cap, and protective shoes. Additionally, wear a ...
Component
COOLING(H4DO) > General DescriptionCOMPONENT1. WATER PUMP(1)Water pump pulley(13)Clip(25)Gasket(2)Water pump ASSY(14)Water pipe hose RH(26)Engine coolant temperature sensor(3)Gasket(15)Water pipe A ...
Other materials:
Wheel replacement
When replacing wheels due, for example,
to damage, make sure the replacement
wheels match the specifications of the
wheels that are fitted as standard equipment.
Replacement wheels are available
from SUBARU dealers.
WARNING
Use only those wheels that are
specified for your vehicle. Wheels
...
Disassembly
CLUTCH SYSTEM > Operating CylinderDISASSEMBLY1. Remove the boot and push rod.2. Apply compressed air through clutch hose attachment hole.NOTE:Face the piston hole down and place a piece of wood underneath to prevent the piston from popping out.3. Separate the piston and piston spring. ...
Trailer towing tips
CAUTION
For models equipped with the
BSD (Blind Spot Detection) and
RCTA (Rear Cross Traffic Alert)
driving support systems, when
towing a trailer, press the BSD/
RCTA OFF switch to deactivate
the system. The system may not
operate properly due to the
blocked radar waves. For det ...
