Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Specification

CLUTCH SYSTEM > General Description

SPECIFICATION

Model

2.0 L

Transmission type

5MT

Clutch cover

Type

Push type

Diaphragm set load

N (kgf, lbf)

5,688 (580, 1,279)

Clutch disc

Facing material

Woven (non-asbestos)

O.D. ? I.D. ? Thickness

mm (in)

Flywheel side

225 ? 150 ? 3.2 (8.86 ? 5.9 ? 0.126)

Clutch cover side

225 ? 150 ? 3.5 (8.86 ? 5.9 ? 0.138)

Spline outer diameter

mm (in)

25.2 (0.992), (number of teeth: 24)

Depth of rivet head

mm (in)

Flywheel side

1.35 — 1.95 (0.053 — 0.077)

Clutch cover side

1.65 — 2.25 (0.065 — 0.089)

Limit of sinking

0.8 (0.031)

Deflection limit

mm (in)

0.7 (0.028) at R = 110 (4.33)

Clutch release lever ratio

1.6

Release bearing

Grease-packed self-aligning

Clutch pedal

Full stroke

mm (in)

130 — 135 (5.12 — 5.31)

Free play

mm (in)

4 — 11 (0.16 — 0.43)

Flywheel

Type

Flexible

Caution
CLUTCH SYSTEM > General DescriptionCAUTION• Remove contamination including dirt and corrosion before removal, installation or disassembly.• Keep the disassembled parts in order and prot ...

Component
CLUTCH SYSTEM > General DescriptionCOMPONENT1. CLUTCH ASSEMBLY(1)Dust cover(6)Release bearingTightening torque: N·m (kgf-m, ft-lb)(2)Lever spring(7)Clutch coverT1:16 (1.6, 11.8)(3)Pivot(8)Cl ...

Other materials:

Assembly
MECHANICAL(H4DO) > Cylinder HeadASSEMBLY(1)Exhaust valve(6)Valve spring(11)Intake valve guide(2)Intake valve(7)Valve spring retainer(12)Exhaust valve guide(3)Cylinder head(8)Valve collet(13)Roller rocker arm pivot(4)Valve spring seat(9)Valve shim(14)Roller rocker arm(5)Intake valve oil seal(10)Ex ...

Dtc p2109 throttle/pedal position sensor "a" minimum stop performance
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2109 THROTTLE/PEDAL POSITION SENSOR "A" MINIMUM STOP PERFORMANCENOTE:For the diagnostic procedure, refer to DTC P2101. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P2101 THROTTL ...

Assembly
EXTERIOR/INTERIOR TRIM > Door TrimASSEMBLY1. Bend the claws while pushing the weather strip - door INN against the door trim so that there is no gap.CAUTION:Beware of the direction of folding the claws.(a)Rivet(b)Direction of folding claws(c)Claw bending direction: bend forward for LH side, backw ...

© 2016-2022 Copyright www.sucross.com