If the select lever cannot be operated, turn the ignition switch back to the "ON" position then move the select lever to the "P" position with the select lever button pressed and brake pedal depressed.
If the select lever does not move after performing the above procedure, perform the following steps.
If you must perform the above procedure, the shift lock system (or the vehicle control system) may be malfunctioning. Contact a SUBARU dealer for an inspection as soon as possible.
If the select lever does not move after performing the above procedure, refer to "Shift lock release using the shift lock release button" F7-28.
Station list
You can select, add or delete a station.
When the tab is touched on the main
screen, a station list will be displayed.
Select to sort the list in the chronological
order of when the Station List was
created.
Select to create a station.
The station can be created using track
...
Component
CONTROL SYSTEMS > General DescriptionCOMPONENT1. AT SELECT LEVER(1)Grip sub ASSY (model with gate shifter)(14)Spacer pin guide(27)Nut(2)Clamp grip pin(15)Plate COMPL(28)Button ASSY-AT(3)Cover grip AT (model with gate shifter)(16)Shaft control(29)Housing(4)Rod COMPL(17)Spacer pin guide(30)Blind A ...
Dtc c2121 transmitter 1 no data
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2121 TRANSMITTER 1 NO DATANOTE:Refer to DTC C2124 for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2124 TRANSMITTER 4 NO DATA"> ...