Subaru Crosstrek Owners Manual: Setting Bluetooth details

Profiles

This system supports the following services. NOTE If your cell phone does not support HFP, registering the Bluetooth phone or using OPP, PBAP, or SPP profiles individually will not be poss ...

BT Devices Connection screen

1. Press the HOME button. 2. Touch the "SETTINGS" key and then touch the tab. 3. Touch the "BT Devices Connection" key and then select the desired device to register. "BT Devices Connect ...

Other materials:

Unlocking the doors
Press the unlock/disarm button to unlock the driver's door. An electronic chirp will sound twice and the hazard warning flashers will flash twice. To unlock all doors and the rear gate, briefly press the unlock/disarm button a second time within 5 seconds. NOTE If the interval between the fi ...

BSD/RCTA OFF indicator
System temporary stops BSD/RCTA temporary stop message BSD/RCTA OFF indicator In the Subaru Ascent, this message is displayed when the BSD/RCTA system is temporarily suspended due to external or internal conditions that prevent accurate operation. Extremely high or extremely low a ...

Installation
CLUTCH SYSTEM > Clutch PedalINSTALLATION1. Install in the reverse order of removal.CAUTION:Always use a new clevis pin.Tightening torque:Clutch pedal18 N·m (1.8 kgf-m, 13.3 ft-lb)Knee airbag module7.5 N·m (0.76 kgf-m, 5.5 ft-lb)Air intake boot3 N·m (0.3 kgf-m, 2.2 ft-lb)2. Ad ...