Subaru Crosstrek Service Manual: Seat belt system
- Front seat belt
- General description
- Rear seat belt
- Seat belt warning system
- Disposal of pretensioner Procedure
- Inspection locations after a collision Inspection
- Pretensioner connector Procedure
Wheel alignment Inspection
REAR SUSPENSION > Wheel AlignmentINSPECTIONNOTE:Measure and adjust the front and rear wheel alignment at a time. Refer to “Wheel Alignment” in “FRONT SUSPENSION” section for ...
Front seat belt
...
Other materials:
Inspection
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Tumble Generator Valve AssemblyINSPECTION1. CHECK MOTOR1. Connect the battery positive terminal to terminal No. 5 and the battery ground terminal to terminal No. 4, and check that the valve is fully opened on LH side and the valve is fully closed on RH side.C ...
Adjustment
DIFFERENTIALS > Rear Differential (VA-type)ADJUSTMENT1. SIDE GEAR BACKLASHAdjust the side gear backlash. Rear Differential (VA-type) > ASSEMBLY">2. HYPOID DRIVEN GEAR BACKLASHAdjust hypoid driven gear backlash. Rear Differential (VA-type) > ASSEMBLY">3. TOOTH CONTACT BETWE ...
Open/close
To open:
First unlock the rear gate lock then push
the rear gate opener button.
To close:
Lower the rear gate slowly and push down firmly until the latch engages.
The rear gate can be lowered easily if you
pull it down holding the recessed grip.
WARNING
To prevent dangerous exhaust
...
