Subaru Crosstrek Owners Manual: Screen OFF setting
1. Perform the preparation steps according to "Preparation for image quality and volume settings"
2. Operate the "
" or "
" switch to
select the "Screen Off" item. Then push
the
button.
3. Push the
button once more.
4. The screen is turned off.
Restoring the screen
When the "
", "
" or
button is
pushed after the ignition switch is turned
to the "ON" position, the screen will be
restored. The screen will be restored with
the basic screen that was displayed when
the screen was turned off. While the
screen is off, a warning message will be
displayed if necessary, but other screens
will not be displayed.
Contrast setting
1. Perform the preparation steps according
to "Preparation for image quality and
volume settings"
2. Operate the "
" or ""
switch to
select the "Contrast" item. Then push the
button.
...
Beep volume setting
1. Perform the preparation steps according
to "Preparation for image quality and
volume settings"
2. Operate the "
" or "
" switch to
select the "Beep" item. Then push the
button.
...
Other materials:
Dtc p1493 coil 1 egr "a" control circuit high
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P1493 COIL 1 EGR "A" CONTROL CIRCUIT HIGHNOTE:For the diagnostic procedure, refer to DTC P1499. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P1499 COIL 4 EGR "A" CONTRO ...
Installation
MECHANICAL(H4DO) > CamshaftINSTALLATION1. CAMSHAFT RHThe camshaft RH and cam carrier are designed as installing as a unit. Refer to “Cam Carrier” for installation procedures of camshaft RH. Cam Carrier > ASSEMBLY"> Cam Carrier > INSTALLATION">2. CAMSHAFT LHThe ...
Rear towing hook
1. Take the towing hook and screwdriver
out of the tool bucket. Take the jack
handle out of the cargo area.
2. Pry off the cover on the rear bumper
using a screwdriver, and you will find a
threaded hole for attaching the towing
hook.
3. Screw the towing hook into the thread
hole unti ...
