Subaru Crosstrek Owners Manual: Safety precautions
CAUTION
- Do not let dust, oil or water get on or in the access key/transmitter when replacing battery.
- Be careful not to touch or damage the printed circuit board in the access key/transmitter when replacing the battery.
- Be careful not to allow children to touch the battery and any removed parts; children could swallow them.
- There is a danger of an explosion
if the battery is incorrectly replaced.
Replace only with the same or equivalent type of the battery.
- Batteries should not be exposed to excessive heat such as bright sunlight, fire or the like.
NOTE
- Replace only with the same or equivalent type of battery recommended by the manufacturer.
- Dispose of used batteries according to local laws
- Mount the battery in the correct
orientation to prevent fluid leakage.
Be careful not to bend the terminals. It may result in a malfunction.
- It is recommended that the battery be replaced by a SUBARU dealer.
- Use a new battery.
- After replacing the battery, confirm that the transmitter functions properly.
Replacing key battery
The access key / transmitter battery may
be discharged under the following conditions.
The operation of the keyless access
function is unstable
The operating distance of the remote
keyless ...
Replacing battery of access key
CAUTION
When removing or reinstalling the
access key cover, make sure that
the plastic part does not come off or
become misaligned.
Battery: Button battery CR2032
Release button
Mechani ...
Other materials:
To increase the speed (by the "RES/ SET" switch)
Press the "RES/SET" switch to the "RES"
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated as the new
set speed.
U.S.-spec. models
When the difference between the actual
vehicle speed and ...
Component
COMMUNICATION SYSTEM > General DescriptionCOMPONENT(1)Horn switch (driver’s airbag module ASSY)(3)Horn relay(5)Horn ASSY - Hi(2)Roll connector(4)Horn ASSY - Lo ...
15
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Cancel Code15Detected when CANCEL switch is pressed or malfunction related to CRUISE switch occurs.TROUBLE SYMPTOM:• Cruise control cannot be set. (Cancelled immediately.)• Cruise control cannot be released.Refer to DTC 1 ...
