Subaru Crosstrek Owners Manual: Safety precautions
CAUTION
- People with delicate skin may
suffer slight burns even at low
temperatures if they use the seat
heater for a long period of time.
When using the heater, always be sure to warn the persons concerned.
- Do not put anything on the seat which insulates against heat, such as a blanket, cushion, or similar items. This may cause the seat heater to overheat.
- When the seat is warmed enough or before you leave the vehicle, be sure to turn off the seat heater.
NOTE
Use of the seat heater for a long period of time while the engine is not running can cause battery discharge.
Seat heater (if equipped)
The seat heater is equipped in the front
seats.
The seat heater operates when the ignition
switch is either in the "ACC" or "ON"
position. ...
Operation
HI - Rapid heating
LO - Normal heating
Off
Left-hand side
Right-hand side
To turn on the seat heater, push the "LO"
or "HI" position on the switch, as desired,
depending on the ...
Other materials:
Specification
DIFFERENTIALS > General DescriptionSPECIFICATION1. REAR DIFFERENTIALWhen replacing a rear differential assembly, select the correct one according to the following table.NOTE:• Using a different rear differential assembly will cause the drive train and tires to drag or emit abnormal noise.&b ...
Dtc c1252 wheel speed sensor signal of one of the wheels
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1252 WHEEL SPEED SENSOR SIGNAL OF ONE OF THE WHEELSDTC detecting condition:• Defective ABS wheel speed sensor signal (noise, irregular signal, etc.)• Defective magnetic encoder&b ...
Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Crankshaft Position SensorREMOVAL1. Disconnect the ground cable from battery.2. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.3. Remove the air intake boot from the air cleaner case (rear) and throttle body, and move the ...