1. Perform the preparation steps according to "Preparation for initialization"
2. Operate the " " or " " switch to select the "Reset to Defaults" item. Then push the button.
3. The system will prompt a Yes/No dialogue ("No" is selected first). To return to the factory default settings, select "Yes" by operating the " " switch.
4. Confirm the setting by pushing the button.
Dtc p2530 ignition switch run position circuit
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2530 IGNITION SWITCH RUN POSITION CIRCUITDTC detecting condition:Immediately at fault recognitionTrouble symptom:Improper idlingCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Cl ...
Dtc b1572 imm circuit except antenna circuit
IMMOBILIZER (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1572 IMM CIRCUIT EXCEPT ANTENNA CIRCUITDTC detecting condition:Communication failure between body integrated unit and ECMCAUTION:When the body integrated unit is replaced, registration of the immobilizer syste ...
Removal
PARKING BRAKE > Parking Brake CableREMOVALCAUTION:• Refer to “CAUTION” of “General Description” before handling the airbag system components. General Description > CAUTION">• Airbag system satellite safing sensor is located in the lower of the rear ...