Subaru Crosstrek Service Manual: Replacement

1. REGISTRATION OF KEYLESS TRANSMITTER WITH SUBARU SELECT MONITOR

NOTE:

• A maximum of four keyless transmitters can be registered for each individual vehicle.

• When replacing or adding the keyless transmitter, new registration of transmitter is necessary.

1. Register the transmitter.

(1) Connect the Subaru Select Monitor to data link connector.

NOTE:

For detailed operation procedures, refer to “Application help”.

(2) Turn the ignition switch to ON.

(3) On «Start» display, select «Diagnosis».

(4) On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

(5) On «Main Menu» display, select «Each System».

(6) On «Select System» display, select «Body Control» and then select «Enter».

(7) On «Select Function» display, select «Work Support».

(8) From the work support item list, select «Keyless ID registration».

(9) According to the directions on the screen, press the button of the transmitter to be registered in order of Lock > Unlock. When registration completed, external buzzer sound once. Repeat the registration as many times as desired.

(10) Press the [Exit] button to finish the operations.

NOTE:

When attempting to register a key that has already been registered, the external buzzer sounds twice.

Inspection

Installation

Other materials:

Dtc b278a push engine switch power supply circuit
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B278A PUSH ENGINE SWITCH POWER SUPPLY CIRCUITDTC detecting condition:When the power supply circuit of the push button ignition switch is shorted to ground.Trouble symptom:• ...

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil PumpINSTALLATION1. Install the O-ring.NOTE:• Use new O-rings.• Apply CVTF to the O-ring.2. Install the plate and the oil pump.NOTE:Apply CVTF to the bolt.Tightening torque:8.5 N·m (0.9 kgf-m, 6.3 ft-lb)3. Install the oil pump chai ...

Low fuel warning light
The low fuel warning light illuminates when the tank is nearly empty, at approximately 2.6 US gal (10.0 liters, 2.2 Imp gal). It only operates when the ignition switch is in the "ON" position. CAUTION Promptly put fuel in the tank whenever the low fuel warning light illuminates. Engine ...