Subaru Crosstrek Service Manual: Replacement
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Differential Gear Oil
REPLACEMENT
CAUTION:
• Immediately after the vehicle has been running or after idling for a long time, the differential gear oil will be hot. Be careful not to burn yourself.
• Be careful not to spill differential gear oil on the exhaust pipe to prevent it from emitting smoke or causing a fire. If gear oil adheres, wipe it off completely.
1. Lift up the vehicle.
2. Remove the differential gear oil drain plug using TORX® bit T70. Drain differential gear oil.
3. Install the differential gear oil drain plug using TORX® bit T70.
NOTE:
Use a new gasket.
Tightening torque:
70 N·m (7.1 kgf-m, 51.6 ft-lb)
4. Remove the filler plug.
(A) | Filler plug |
5. Pour gear oil into the filler plug hole.
Recommended gear oil:
General Description > SPECIFICATION">
Gear oil capacity:
General Description > SPECIFICATION">
6. Adjust the level of differential gear oil. Differential Gear Oil > ADJUSTMENT">
Adjustment
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Differential Gear OilADJUSTMENTNOTE:Immediately after removing the overflow drain plug, remaining gear oil (approx. 8 cc) may come out of the overflow pi ...
Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Differential Gear OilINSPECTIONCheck that there is no leakage of differential gear oil from the converter case. ...
Other materials:
Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > CompressorREMOVAL1. CROSSTREK MODEL1. Perform compressor oil return operation. Compressor Oil > PROCEDURE">2. Turn the A/C switch to OFF, and turn the ignition switch to OFF.3. Using the refrigerant recovery system, discharge refrigerant. Re ...
Display settings
Touch the tab to set display.
Item
Function
Day/Night
Mode
The "Auto", "Day" or "Night" key
can be selected on the pop-up
screen.
When the "Auto" key is selected,
the screen changes to day or
night mode depending on the
position of the headlight swi ...
Tire Identification Number (TIN)
Tire Identification Number (TIN) is
marked on the intended outboard
sidewall. The TIN is composed of
four groups. Here is a brief review
of the TIN with a breakdown of its
individual elements.
(1) Manufacturer's Identification
Mark
(2) Tire Size
(3) Tire Type Code
(4) Date of Manufacture
...
