Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Removal

AIRBAG SYSTEM > Knee Airbag Module

REMOVAL

CAUTION:

Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">

1. Turn the ignition switch to OFF.

2. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. NOTE">

3. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > REMOVAL">

4. Remove the nuts to remove the knee airbag module and disconnect the harness connector. Airbag Connector > PROCEDURE">

Installation
AIRBAG SYSTEM > Knee Airbag ModuleINSTALLATIONCAUTION:• Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYST ...

Passenger s airbag module
...

Other materials:

Inspection
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Subaru Select MonitorINSPECTION1. COMMUNICATION FOR INITIALIZING THE AIRBAG SYSTEM IS IMPOSSIBLEDETECTING CONDITION:Defective harness connectorTROUBLE SYMPTOM:Communication is impossible between the airbag control module and the Subaru Select Monitor.NOTE ...

Adjustment
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Reverse Check SleeveADJUSTMENT1. NEUTRAL POSITION ADJUSTMENT1. Shift the gear into 3rd gear position.2. Because of the return spring, until the arm contacts the stopper the shifter arm will feel lighter moving towards 1st/2nd gear and heavier towards th ...

Disassembly
DRIVE SHAFT SYSTEM > Front Hub Unit BearingDISASSEMBLYUsing the ST or a hydraulic press, push out the hub bolt (b) from the front hub unit bearing (a).CAUTION:• Be careful not to hammer the hub bolts. This may deform the hub unit bearing.• Do not reuse the hub bolt.NOTE:Since the hub ...

© 2016-2022 Copyright www.sucross.com