Subaru Crosstrek Service Manual: Removal
WIPER AND WASHER SYSTEMS > Wiper Blade
REMOVAL
1. FRONT
While pushing the locking clip (A) up, pull out the blade assembly - windshield wiper in the direction of the arrow, and remove it from the arm assembly - windshield wiper.
2. REAR
Turn the blade assembly - rear wiper in the direction of arrow (A) and remove it from the arm assembly - rear wiper.
(A) | Turn the wiper blade. | ||||
(a) | Arm ASSY - rear wiper | (b) | Blade ASSY - rear wiper | (c) | Wiper blade attachment section |
Assembly
WIPER AND WASHER SYSTEMS > Wiper BladeASSEMBLY1. FRONT1. Insert the rubber assembly - windshield wiper onto the blade - windshield wiper so that the stopper is in the position shown in the figure.2 ...
Disassembly
WIPER AND WASHER SYSTEMS > Wiper BladeDISASSEMBLY1. FRONTPull the side (a) of the wiper rubber stopper, and remove the rubber assembly - windshield wiper from the blade assembly - windshield wiper. ...
Other materials:
Component
SECURITY AND LOCKS > General DescriptionCOMPONENT1. DOOR LOCK ASSEMBLY(A)Front(B)Rear (1)Grommet - screw(9)Key lock - door (driver’s seat only)(17)Frame ASSY - rear door outer(2)Remote ASSY - door(10)Spacer - door handle outer B (3)Cap remote(11)Spacer - door handle outer ATightening ...
Dtc b2a0e mute line circuit
TELEMATICS SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2A0E MUTE LINE CIRCUITDiagnosis start condition:When ignition switch is ON.DTC detecting condition:Any of the following conditions occurs continuously for five seconds or more after the ignition switch i ...
Removal
COOLING(H4DO) > Radiator Sub Fan and Fan MotorREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the air intake duct. Air Intake Duct > REMOVAL">3. Disconnect the connector from the sub fan motor assembly.4. Remove the bolts which hold the radiator sub fan sh ...
