SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF) > Sunroof Motor
REMOVAL
1. Completely close the lid assembly - sunroof.
2. Disconnect the ground cable from battery. NOTE">
3. Remove the light assembly - map. (Models without EyeSight) Spot Map Light > REMOVAL">
4. Remove the stereo camera cover assembly. (Models with EyeSight) Stereo Camera > REMOVAL">
5. Remove the motor assembly - sunroof.
(1) Disconnect the harness connector.
(2) Remove the screws and remove the motor assembly - sunroof.
CAUTION:
When removing the motor assembly - sunroof, secure the cable assembly so that it does not move.
Assembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Front Differential AssemblyASSEMBLY1. DIFFERENTIAL CASE ASSEMBLY1. Install the washer and differential bevel gear into the differential case (RH).2. Install the differential bevel pinions into differential case (RH) and install the pinion shaft.(A)Pinio ...
Dtc b27a1 driver side external antenna open
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B27A1 DRIVER SIDE EXTERNAL ANTENNA OPENDTC detecting condition:When open circuit occurs in the harness between keyless access CM and driver’s side front door outer handle. ...
Removal
SECURITY AND LOCKS > Keyless Entry Control ModuleREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the trim panel - rear apron LH. Rear Quarter Trim > REMOVAL">3. Remove the keyless entry control module.(1) Disconnect the connector.(2) Remove the bolt and th ...