Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Removal

STARTING/CHARGING SYSTEMS(H4DO) > Generator

REMOVAL

1. Remove the V-belt covers.

2. Disconnect the ground cable from battery. NOTE">

3. Remove the V-belts. V-belt > REMOVAL">

4. Disconnect the connector (A) and terminal (B) from the generator, and remove the clip (C).

5. Remove the V-belt cover bracket.

6. Remove the generator from the generator bracket.

7. Remove the V-belt tensioner assembly. V-belt > REMOVAL">

8. Remove the generator bracket from the engine.

Assembly
STARTING/CHARGING SYSTEMS(H4DO) > GeneratorASSEMBLYAssemble in the reverse order of disassembly.NOTE:• Refer to component for tightening torque of each part. General Description > COMPONE ...

Disassembly
STARTING/CHARGING SYSTEMS(H4DO) > GeneratorDISASSEMBLY1. Remove the cap from the generator.2. Remove four bolts.3. Use a drier to heat the rear cover (A) portion to 50 — 60°C (122 — ...

Other materials:

Inspection
EyeSight (DIAGNOSTICS) > Subaru Select MonitorINSPECTION1. COMMUNICATION FOR INITIALIZING IMPOSSIBLE• Communication error with stereo cameraDETECTING CONDITION:• Defective harness connector• Power supply circuit malfunction• Defective stereo camera• Defective CAN sys ...

Removal
CONTROL SYSTEMS > Select CableREMOVAL1. Shift the select lever to “N” range.2. Disconnect the ground cable from battery. NOTE">NOTE:For model with battery sensor, disconnect the ground terminal from battery sensor.3. Lift up the vehicle.4. Remove the center exhaust pipe. Cen ...

Removal
BRAKE > Rear Brake PadREMOVAL1. Lift up the vehicle, and then remove the rear wheels.2. Remove the rear brake pad.(1) Remove the bolts and remove the brake hose bracket.(2) Remove the caliper bolt, and raise and hold the caliper body assembly.NOTE:Do not disconnect the brake hose from the caliper ...

© 2016-2024 Copyright www.sucross.com