SECURITY AND LOCKS > Security Control Module
REMOVAL
CAUTION:
• Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">
• Do not allow harness and connectors to interfere or get tangled up with other parts.
• If the steering wheel and steering angle sensor (steering roll connector) are removed, perform “VSC(VDC) Centering Mode” of the VDC. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) > ADJUSTMENT">
1. Remove the steering wheel. Steering Wheel > REMOVAL">
2. Remove the instrument panel assembly. Instrument Panel Assembly > REMOVAL">
3. Remove the heater and cooling unit assembly. Heater and Cooling Unit > REMOVAL">
4. Remove the security control module.
(1) Disconnect the connector.
(2) Remove the nuts, and remove the security control module.
Making a call
There are several methods by which a call
can be made, as described below.
1. Press the HOME button on the audio
panel.
2. Touch the "PHONE" key.
3. Select the desired key to make a call
from the list.
Item
Function
Incoming
Calls
Display the history of inco ...
Temporary spare tire
WARNING
Never tow a trailer when the
temporary spare tire is used.
The temporary spare tire is not
designed to sustain the towing
load. Use of the temporary spare
tire when towing can result in
failure of the spare tire and/or
less stability of the vehicle and
may lead to an ac ...
Removal
AIRBAG SYSTEM > Curtain Airbag ModuleREMOVAL1. CROSSTREK MODELCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Turn the ignition switch to OFF.2. ...