Subaru Crosstrek Service Manual: Removal
SECURITY AND LOCKS > Rear Gate Latch and Actuator Assembly
REMOVAL
1. Disconnect the ground cable from battery. NOTE">
2. Remove the trim panel - rear gate. Rear Gate Trim > REMOVAL">
3. Remove the latch and actuator - rear gate.
(1) Disconnect the connector.
(2) Remove the bolts, and remove the latch and actuator - rear gate.
Inspection
SECURITY AND LOCKS > Rear Gate Latch and Actuator AssemblyINSPECTION1. LATCHCheck if the latch operates normally.If latch deformation, abnormal wear, or unsmooth lock operation is observed, replace ...
Installation
SECURITY AND LOCKS > Rear Gate Latch and Actuator AssemblyINSTALLATIONInstall each part in the reverse order of removal.Tightening torque:Refer to “COMPONENT” of “General Descript ...
Other materials:
Installation
REAR SUSPENSION > Front Lateral LinkINSTALLATIONCAUTION:• Be sure to use a new self-locking nut.• Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.1. Before installation, inspect the following items and repl ...
Component
CLUTCH SYSTEM > General DescriptionCOMPONENT1. CLUTCH ASSEMBLY(1)Dust cover(6)Release bearingTightening torque: N·m (kgf-m, ft-lb)(2)Lever spring(7)Clutch coverT1:16 (1.6, 11.8)(3)Pivot(8)Clutch discT2: Flywheel > INSTALLATION">(4)Release lever(9)Flexible flywheel (5)Clip(10)Pi ...
Dtc u0122 lost communication with vehicle dynamics control module
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0122 LOST COMMUNICATION WITH VEHICLE DYNAMICS CONTROL MODULENOTE:For the diagnostic procedure, refer to LAN section. Basic Diagnostic Procedure">1. OUTLINE OF DIAGNOSISDetect malfunction of CAN commu ...
