Subaru Crosstrek Service Manual: Removal
SECURITY AND LOCKS > Keyless Transmitter
REMOVAL
1. KEYLESS TRANSMITTER BATTERY
CAUTION:
To prevent static electricity damage to the keyless transmitter printed circuit board, touch the steel area of building with hand to discharge static electricity carried on body or clothes before disassembling the keyless transmitter.
1. Remove the keyless transmitter cover, and take out the transmitter case (A).
NOTE:
Use a flat tip screwdriver with protective tape or cloth in order not to damage the components.
2. Release the claws to open the transmitter case, then remove the battery (A).
Installation
SECURITY AND LOCKS > Keyless TransmitterINSTALLATION1. KEYLESS TRANSMITTER BATTERYInstall each part in the reverse order of removal. ...
Other materials:
Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Blower Resistor (Manual A/C Model)REMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the glove box. Glove Box > REMOVAL">3. Remove the engine control module (ECM). Engine Control Module (ECM) > REMOVAL">4 ...
Removal
AIRBAG SYSTEM > Side Airbag ModuleREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">NOTE:Remove the passenger’s side by referring to driv ...
Installation
WIPER AND WASHER SYSTEMS > Front Wiper ArmINSTALLATION1. MODELS WITHOUT EyeSight1. Install the arm assembly - windshield wiper.(1) Assemble the arm assembly - windshield wiper so that the blade assembly - windshield wiper is aligned to the ceramic print point mark of the windshield glass.(2) Tigh ...
