Subaru Crosstrek Service Manual: Removal
SECURITY AND LOCKS > Keyless Access Indoor Antenna
REMOVAL
1. FRONT ANTENNA
1. Disconnect the ground cable from battery. NOTE">
2. Remove the cover - shift lever. Console Box > REMOVAL">
3. Disconnect the connector and remove the front antenna assembly - interior.
2. REAR ANTENNA
1. Disconnect the ground cable from battery. NOTE">
2. Remove the rear seat cushion assembly. Rear Seat > REMOVAL">
3. Remove the rear antenna assembly - interior.
NOTE:
Do not remove the antenna assembly from the cover. If removed, the antenna assembly and cover mounting becomes loose, causing abnormal noises.
(1) Disconnect the connector.
(2) Remove the screw, and remove the rear antenna assembly - interior.
Inspection
SECURITY AND LOCKS > Keyless Access Indoor AntennaINSPECTION1. Check the setting by performing Keyless access system check using the Subaru Select Monitor. Keyless Access System Check > OPERATI ...
Installation
SECURITY AND LOCKS > Keyless Access Indoor AntennaINSTALLATIONInstall each part in the reverse order of removal. ...
Other materials:
Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.NOTE:If the fuse is blown again, check the system wiring harness.2. CHECK RELAY1. Check the resistance between relay terminals.&bul ...
Removal
EXHAUST(H4DO) > MufflerREMOVALCAUTION:Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.1. Turn the ignition switch to OFF.2. Lift up the vehicle.3. Remove the bolts and self-locking nuts which secure the rear exhaust pipe to the muffler.4. Apply a c ...
Inspection
CLUTCH SYSTEM > Release Bearing and LeverINSPECTION1. RELEASE BEARINGCAUTION:Since this bearing is grease-sealed and is a non-lubrication type, do not wash with gasoline or any other solvent when servicing the clutch.1. Check the bearing for smooth movement by applying force to the bearing in the ...
