Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Removal

SECURITY AND LOCKS > Keyless Access CM

REMOVAL

CAUTION:

Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">

1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. NOTE">

2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > REMOVAL">

3. Remove the knee airbag module. Knee Airbag Module > REMOVAL">

4. Release the lock and remove the fuse holder.

5. Remove the relay & fuse box.

(1) Disconnect the connector.

(2) Remove the bolts and nuts, and remove the relay & fuse box.

6. Remove the keyless access CM.

CAUTION:

Be careful to keep water and other foreign materials away from body integrated unit terminals.

(1) Disconnect the connector.

(2) Release the claws, and pull out the keyless access CM from the bracket.

Installation
SECURITY AND LOCKS > Keyless Access CMINSTALLATIONCAUTION:• When the control module related to immobilizer has been replaced, be sure to perform the registration of immobilizer system. For de ...

Keyless access indoor antenna
...

Other materials:

Bluetooth audio
The Bluetooth audio system enables users to enjoy listening to music that is played on a portable player on the vehicle speakers via wireless communication. This audio system supports Bluetooth, a wireless data system capable of playing portable audio music without cables. If your device do ...

Dtc b2329 rear radar axis alignment incomplete
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2329 REAR RADAR AXIS ALIGNMENT INCOMPLETEDTC DETECTING CONDITION:Axis adjustment of the radar sensor has failed.(Forced termination of the Subaru Select Monitor, improper loca ...

Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Air Mix Door ActuatorINSPECTION1. CHECK LINK1. Visually check the operation range of the link, and remove the foreign material if any.2. Operate the temperature control dial to check that the link operates normally.3. If it does not operate normally as t ...

© 2016-2024 Copyright www.sucross.com