SECURITY AND LOCKS > Front Hood Lock Assembly
REMOVAL
1. Open the front hood.
2. Remove the clip, and remove the bracket - grille.
NOTE:
To prevent damage to the bracket - grille, make sure to remove all clips.
3. Remove the lock assembly - front hood.
(1) Remove the bolt and clip.
(2) Disconnect the release cable, and detach the lock assembly - front hood.
NOTE:
When disconnecting the release cable, refer to “FRONT HOOD OPENER” of “Remote Openers”. Remote Openers > REMOVAL">
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Forward Clutch AssemblyINSTALLATION1. Install the thrust bearing to the converter case.NOTE:Face the temper color surface to the converter case side.2. Install the seal ring to the input shaft.NOTE:• Use new seal rings.• When installing the ...
Clutch system Inspection and adjustment
PERIODIC MAINTENANCE SERVICES > Clutch SystemINSPECTION AND ADJUSTMENTRefer to “CL” section for inspection and adjustment of clutch system. Clutch Pedal > INSPECTION"> Clutch Pedal > ADJUSTMENT"> ...
Disposal
FRONT SUSPENSION > Front StrutDISPOSALCAUTION:• Before handling the strut damper and shock absorber, be sure to wear goggles to protect eyes from gas, oil and cutting powder.• Do not disassemble the strut damper and shock absorber or place them into a fire.• When discarding gas ...