Subaru Crosstrek Service Manual: Removal

1. Disconnect the ground cable from battery. NOTE">

2. Lift up the vehicle, and then remove the rear wheels.

3. Remove the sensor assembly - headlight beam leveler. (Model with auto headlight beam leveler, left side only)

CAUTION:

Do not apply impact to the sensor assembly - headlight beam leveler or forcibly move the arm. Doing so may cause sensor damage and malfunction.

(1) Disconnect the connector of the sensor assembly - headlight beam leveler.

(2) Remove the nuts, and remove the sensor assembly - headlight beam leveler.

4. Remove the bolts and nuts, and remove the lateral link assembly - rear on the left and right sides.

(1) Remove the nut and disconnect the rear stabilizer link.

(2) Remove the bolts from the lower side of rear shock absorber assembly.

(3) Disconnect the lateral link assembly - rear.

Assembly

Disassembly

Other materials:

Removal
DIFFERENTIALS > Rear Differential (T-type)REMOVAL1. Shift the select lever or gear shift lever to neutral.2. Release the parking brake.3. Disconnect the ground cable from battery.4. Lift up the vehicle.5. Remove the rear wheels.6. Drain differential gear oil. Differential Gear Oil > REPLACEME ...

Removal
MECHANICAL(H4DO) > CamshaftREMOVAL1. CAMSHAFT RHThe camshaft RH and cam carrier are designed as removing as a unit. Refer to “Cam Carrier” for removal procedures of camshaft RH. Cam Carrier > REMOVAL"> Cam Carrier > DISASSEMBLY">2. CAMSHAFT LHThe camshaft LH an ...

Keyless access setting (models with "keyless access with pushbutton start system")
Preparation for keyless access settings 1. Perform the preparation steps according to "Preparation for car settings" 2. Operate the " " or "  " switch to select the "Keyless Access Setting" item. Then push the   button. Driver's door unlock setting 1. Perform the preparatio ...