REAR SUSPENSION > Front Lateral Link
REMOVAL
1. Lift up the vehicle, and then remove the rear wheels.
2. Remove the bolts and nuts, and then remove the trailing link.
3. Remove the lateral link assembly - front.
(1) Remove the snap pin (a) and nut (b).
(2) Remove the ball joint from the housing assembly - rear axle.
Preparation tool:
Tie-rod ball joint puller
(3) Scribe alignment marks (c) on the adjusting bolt for lateral link assembly - front and on the rear sub frame assembly.
(4) Remove the adjusting bolt (d), and remove the lateral link assembly - front.
CAUTION:
When removing the adjusting bolt (d), make sure to fix the bolt head in place when loosening the nut (e).
BSD/RCTA approach indicator light
BSD/RCTA approach indicator light
It is mounted on each side of the outside
mirrors.
The indicator light will illuminate when a
vehicle approaching from behind is detected.
The indicator light will flash to warn the
driver of dangers under the following
conditions.
While the indic ...
Loading your vehicle
WARNING
Never allow passengers to ride
on a folded rear seatback or in
the cargo area. Doing so may
result in serious injury.
Never stack luggage or other
cargo higher than the top of the
seatback because it could tumble
forward and injure passengers in
the event of a sudden stop ...
Specifications
Dimensions
These specifications are subject to change without notice.
*: Measured with vehicle empty
Engine
Fuel
For more details, refer to "Fuel" F7-3. ...