Subaru Crosstrek Service Manual: Removal
MECHANICAL(H4DO) > Crank Sprocket
REMOVAL
NOTE:
When replacing a single part, perform the work with the engine assembly installed to body.
1. Remove the chain cover. Chain Cover > REMOVAL">
2. Remove the timing chain. Timing Chain Assembly > REMOVAL">
3. Remove the crank sprocket.
Inspection
MECHANICAL(H4DO) > Crank SprocketINSPECTION1. Check the crank sprocket teeth for abnormal wear and scratches.2. Make sure there is no free play between crank sprocket and key. ...
Installation
MECHANICAL(H4DO) > Crank SprocketINSTALLATION1. Install the crank sprocket.NOTE:The direction of installation is not specified for the crank sprocket.2. Install the timing chain. Timing Chain Asse ...
Other materials:
Cruise control indicator light (if equipped)
This
light illuminates when the cruise
control main button is pressed to activate
the cruise control function. For details,
refer to "To set cruise control"
CAUTION
If the CHECK ENGINE warning light/
malfunction indicator light illuminates,
the cruise control indicator
light flashes at t ...
Keyless access with push-button start system (if equipped)
The keyless access with push-button start
system allows you to perform the following
functions when you are carrying the
access key.
Locking and unlocking of the doors and
rear gate
Starting and stopping the engine. For
detailed information, refer to "Starting and
stopping engine (mod ...
Inspection
LIGHTING SYSTEM > SRF OFF SwitchINSPECTION1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard2 — 3OFF1 M? or moreONLess than 1 ?2. Apply battery voltage between the connector terminals to check lighting condition of illu ...
