MECHANICAL(H4DO) > Crank Pulley
REMOVAL
NOTE:
When replacing a single part, perform the work with the engine assembly installed to body.
1. When working on the vehicle
NOTE:
When working on the vehicle, perform the following steps also.
(1) Remove the radiator main fan & fan motor assembly and radiator sub fan & fan motor assembly. Radiator Main Fan and Fan Motor > REMOVAL"> Radiator Sub Fan and Fan Motor > REMOVAL">
2. Remove the V-belts. V-belt > REMOVAL">
3. Use the ST to lock the crank pulley, and remove the crank pulley bolt.
NOTE:
To prevent damaging ST1, attach the ST2 onto the ST1 as shown.
ST1 18355AA000 | PULLEY WRENCH |
ST2 18334AA000 | PULLEY WRENCH PIN SET |
ST1 18355AA000 | PULLEY WRENCH |
ST2 18334AA000 | PULLEY WRENCH PIN SET |
4. Remove the crank pulley.
5. Remove the front oil seal.
Specification
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > General DescriptionSPECIFICATION1. HEATER SYSTEMItemSpecificationsConditionHeating capacity5.0 kW (4,299 kcal/h, 17,059 BTU/h) or more• Air flow control dial or switch: FOOT• Temperature control dial: HI (MAX HOT)• Temperature differenc ...
Camera adjustment, inspection Procedure
EyeSight > Camera Adjustment, InspectionPROCEDURECAUTION:• Perform the camera adjustment and inspection at curb weight without passengers.• Handle RANDOM CHART (ST) carefully so as not to break it with the adhesive force of the tape.Perform inspection or adjustment according to the fo ...
Dtc c1211 front right abs sensor circuit
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1211 FRONT RIGHT ABS SENSOR CIRCUITNOTE:For the diagnostic procedure, refer to “DTC C1241 REAR LEFT ABS SENSOR CIRCUIT”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) ...