Subaru Crosstrek Service Manual: Removal
MECHANICAL(H4DO) > Cam Sprocket
REMOVAL
1. CAM SPROCKET RH
NOTE:
When replacing a single part, perform the work with the engine assembly installed to body.
• Intake cam sprocket RH
1. Remove the chain cover. Chain Cover > REMOVAL">
2. Remove the timing chain RH. Timing Chain Assembly > REMOVAL">
3. Hold the intake cam sprocket RH using the ST1 and ST2, and remove the bolts using the ST3.
CAUTION:
Perform the operation carefully since the ST comes off easily.
| ST1 18355AA000 | PULLEY WRENCH |
| ST2 18334AA020 | PULLEY WRENCH PIN SET |
| ST3 18270KA010 | SOCKET |
4. Remove the intake cam sprocket RH.
• Exhaust cam sprocket RH
1. Remove the chain cover. Chain Cover > REMOVAL">
2. Remove the timing chain RH. Timing Chain Assembly > REMOVAL">
3. Hold the exhaust cam sprocket RH using the ST1 and ST2, and remove the bolts using the ST3.
CAUTION:
Perform the operation carefully since the ST comes off easily.
| ST1 18355AA000 | PULLEY WRENCH |
| ST2 18334AA020 | PULLEY WRENCH PIN SET |
| ST3 18270KA010 | SOCKET |
4. Remove the exhaust cam sprocket RH.
2. CAM SPROCKET LH
NOTE:
When replacing a single part, perform the work with the engine assembly installed to body.
• Intake cam sprocket LH
1. Remove the chain cover. Chain Cover > REMOVAL">
2. Remove the timing chain LH. Timing Chain Assembly > REMOVAL">
3. Hold the intake cam sprocket LH using the ST1 and ST2, and remove the bolts using the ST3.
CAUTION:
Perform the operation carefully since the ST comes off easily.
| ST1 18355AA000 | PULLEY WRENCH |
| ST2 18334AA020 | PULLEY WRENCH PIN SET |
| ST3 18270KA010 | SOCKET |
4. Remove the intake cam sprocket LH.
• Exhaust cam sprocket LH
1. Remove the chain cover. Chain Cover > REMOVAL">
2. Remove the timing chain LH. Timing Chain Assembly > REMOVAL">
3. Hold the exhaust cam sprocket LH using the ST1 and ST2, and remove the bolts using the ST3.
CAUTION:
Perform the operation carefully since the ST comes off easily.
| ST1 18355AA000 | PULLEY WRENCH |
| ST2 18334AA020 | PULLEY WRENCH PIN SET |
| ST3 18270KA010 | SOCKET |
4. Remove the exhaust cam sprocket LH.
Inspection
MECHANICAL(H4DO) > Cam SprocketINSPECTIONCheck the cam sprocket teeth for abnormal wear and scratches. ...
Installation
MECHANICAL(H4DO) > Cam SprocketINSTALLATION1. CAM SPROCKET RH• Intake cam sprocket RH1. Install the intake cam sprocket RH by aligning the knock hole (A) of intake cam sprocket RH and the kno ...
Other materials:
Dtc b27a1 driver side external antenna open
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B27A1 DRIVER SIDE EXTERNAL ANTENNA OPENDTC detecting condition:When open circuit occurs in the harness between keyless access CM and driver’s side front door outer handle. ...
Dtc b1613 front sub sensor rh initialization error
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1613 FRONT SUB SENSOR RH INITIALIZATION ERRORDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Open or short circuit in harness of front sensor bus (RH)• Front sub sensor (RH) is fa ...
Dtc b28a9 stereo camera synchronized recognition data
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B28A9 STEREO CAMERA SYNCHRONIZED RECOGNITION DATADetected when error occurs in the communication data inside the control module caused by external factors such as noises.NOTE:If the same DTC is still detected afte ...
