Subaru Crosstrek Service Manual: Removal
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Switches and Harness
REMOVAL
1. BACK-UP LIGHT AND NEUTRAL POSITION SWITCH
1. Disconnect the ground cable from battery.
2. Remove the clip (A) from the air intake boot.
3. Loosen the clamp (B) connecting the air intake boot and air cleaner case (rear).
4. Loosen the clamp (C) which connects the air intake boot and throttle body.
5. Remove the air intake boot from the throttle body, and move it to the left side wheel apron.
6. Disconnect the connector back-up light switch & neutral position switch.
(A) | Neutral position switch connector (brown) |
(B) | Back-up light switch connector (gray) |
7. Remove the harness connector from bracket.
8. Lift up the vehicle.
9. Remove the harness from each clip.
10. Remove the back-up light switch & neutral position switch with the harness.
(A) | Neutral position switch |
(B) | Back-up light switch |
Inspection
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Switches and HarnessINSPECTION1. BACK-UP LIGHT SWITCH1. Turn the ignition switch to OFF.2. Disconnect the back light switch connector.3. Measure the resi ...
Installation
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Switches and HarnessINSTALLATION1. BACK-UP LIGHT AND NEUTRAL POSITION SWITCH1. Install the back-up light switch & neutral position switch with the ha ...
Other materials:
Seatbelt safety tips
WARNING
All persons in the vehicle should
fasten their seatbelts BEFORE
the vehicle starts to move. Otherwise,
the possibility of serious
injury becomes greater in the
event of a sudden stop or accident.
All belts should fit snugly in order
to provide full restraint. Loose
fittin ...
Assembly
FRONT SUSPENSION > Front ArmASSEMBLY1. BUSHING FRONT - FRONT ARM1. Before assembly, inspect the following items and replace any faulty part with a new one.• Check the front arm assembly for damage or cracks, and replace if defective.• Visually check the bushing for abnormal cracks, fa ...
Read diagnostic trouble code (dtc) Operation
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Read Diagnostic Trouble Code (DTC)OPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each Syste ...
