Subaru Crosstrek Service Manual: Removal

1. Remove the manual transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL">

2. Remove the transfer case together with the extension case assembly. Transfer Case and Extension Case Assembly > REMOVAL">

3. Remove the transmission case. Transmission Case > REMOVAL">

4. Remove the drive pinion shaft assembly. Drive Pinion Shaft Assembly > REMOVAL">

5. Remove the main shaft assembly. Main Shaft Assembly > REMOVAL">

6. Remove the front differential assembly.

NOTE:

• Do not confuse the right and left taper roller bearing outer races.

• Be careful not to damage the oil seal of differential side retainer.

7. Remove the differential side retainers using ST.

8. Remove the taper roller bearing outer race from the transmission case.

Adjustment

Assembly

Other materials:

Inspection
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > General DescriptionINSPECTION1. BATTERYCheck the battery. Battery > INSPECTION">2. TRANSMISSION GROUNDMake sure that the ground terminal bolt is tightened securely.Tightening torque:14 N·m (1.4 kgf-m, 10.3 ft-lb)3. OPERATION OF ...

Remote start safety features
For safety and security reasons, the remote engine start system will prevent starting (or stop the engine if running) and sound the horn twice if any of the following conditions is detected. In addition, the fob will flash and beep 3 times. The brake pedal is depressed A key is in the ign ...

SRS airbag system warning light
WARNING If the warning light exhibits any of the following conditions, there may be a malfunction in the seatbelt pretensioners and/or SRS airbag system. Immediately take your vehicle to your nearest SUBARU dealer to have the system checked. Unless checked and properly repaired, the seatb ...