Subaru Crosstrek Service Manual: Removal
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Drive Pinion Shaft Assembly
REMOVAL
1. Remove the manual transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL">
2. Remove the transfer case together with the extension case assembly. Transfer Case and Extension Case Assembly > REMOVAL">
3. Remove the transmission case. Transmission Case > REMOVAL">
4. Remove the drive pinion shaft assembly.
NOTE:
Use a hammer handle, etc. to remove if too tight.
(A) | Main shaft ASSY |
(B) | Drive pinion shaft assembly |
5. Remove the main shaft assembly. Main Shaft Assembly > REMOVAL">
Adjustment
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Drive Pinion Shaft AssemblyADJUSTMENT1. THRUST BEARING PRELOAD1. Select a suitable adjusting washer No. 1 so that dimension (H) will be zero in a visual ...
Assembly
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Drive Pinion Shaft AssemblyASSEMBLY1. Install the sleeve and the gear and hub assembly by matching the alignment marks.NOTE:• Make sure that there ...
Other materials:
Location
COMMUNICATION SYSTEM > Relay and FuseLOCATIONMain fuse boxFuse 15 A (horn assembly)(A)Horn relay(B)NOTE:For other related fuses, refer to the wiring diagram. Power Supply Circuit"> ...
Inspection
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Level SensorINSPECTION1. Check that the fuel level sensor has no damage.2. Measure the fuel level sensor float position.NOTE:When inspecting the fuel level sensor, perform the work with the sensor installed to the fuel pump.(1)FULL(2)EMPTY(3)Fuel tank se ...
Check list for interview Check
ENGINE (DIAGNOSTICS)(H4DO) > Check List for InterviewCHECK1. CHECK LIST NO. 1Check the following item when problem has occurred.NOTE:Use copies of this page for interviewing customers.Customer’s name Engine No. Date of purchase Fuel type Date of repair Odometer readingkmV.I.N. milesWeather ...
