Subaru Crosstrek Service Manual: Removal

Subaru Crosstrek Service Manual / Lighting system / Side turn signal light assembly / Removal

LIGHTING SYSTEM > Side Turn Signal Light Assembly

REMOVAL

1. Disconnect the ground cable from battery. NOTE">

2. Remove the light assembly - side turn mirror. Outer Mirror Assembly > DISASSEMBLY">

Inspection

LIGHTING SYSTEM > Side Turn Signal Light AssemblyINSPECTION1. Install the light to check if it blinks normally.2. If it fails to blink normally, replace the light assembly - side turn mirror with a ...

Installation

LIGHTING SYSTEM > Side Turn Signal Light AssemblyINSTALLATIONInstall each part in the reverse order of removal. ...

Other materials:

Inspection
AIRBAG SYSTEM > Roll ConnectorINSPECTION1. VISUAL INSPECTIONCheck for the following, and replace the damaged parts with new parts.• Combination switch is cracked or deformed.• Roll connector is cracked or deformed.2. UNIT INSPECTION OF ROLL CONNECTORCAUTION:• Do not rotate the r ...

Adjustment
CLUTCH SYSTEM > Clutch PedalADJUSTMENT1. Turn the lock nut until the full stroke of clutch pedal becomes within the specification.CAUTION:When adjusting the full stroke of clutch pedal, do not turn the clutch switch.NOTE:If the lock nut cannot adjust the full stroke of clutch pedal to the specifi ...

Dtc c1413 power supply voltage
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1413 POWER SUPPLY VOLTAGEDTC detecting condition:Improper VDCCM&H/U power supply voltageTrouble symptom:• ABS does not operate.• EBD may not operate.• VDC does not oper ...