Subaru Crosstrek Service Manual: Removal
LIGHTING SYSTEM > Room Light
REMOVAL
1. Disconnect the ground cable from battery. NOTE">
2. Remove the light assembly - room.
CAUTION:
When using a flat tip screwdriver, apply protective tape or cloth and be careful not to cause damage.
(1) Release the claws and remove the lens.
(2) Remove the screws and pull out the light assembly - room.
(3) Disconnect the connector and remove the light assembly - room and the bulb.
CAUTION:
Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
Inspection
LIGHTING SYSTEM > Room LightINSPECTION1. ROOM LIGHT BULB1. Visually check the bulb for blow out.2. Check the bulb specification. General Description > SPECIFICATION">3. Replace the bulb ...
Installation
LIGHTING SYSTEM > Room LightINSTALLATIONInstall each part in the reverse order of removal. ...
Other materials:
Removal
LIGHTING SYSTEM > Clearance/Parking Light BulbREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Turn the steering wheel in the opposite direction from the parts to be removed. Then remove the clips and turn over the mud guard - front.3. Remove the bulb socket and parking light ...
Removal
MECHANICAL(H4DO) > Crank PulleyREMOVALNOTE:When replacing a single part, perform the work with the engine assembly installed to body.1. When working on the vehicleNOTE:When working on the vehicle, perform the following steps also.(1) Remove the radiator main fan & fan motor assembly and radia ...
Inspection
COOLING(H4DO) > Engine CoolantINSPECTIONNOTE:When adding the engine coolant, always use SUBARU Super Coolant.1. Park the vehicle on a level surface.2. Turn the ignition switch to OFF.3. Check the engine coolant amount, and if the coolant level is low, check for the coolant leakage, and then add t ...
