LIGHTING SYSTEM > Hazard Switch
REMOVAL
1. Disconnect the ground cable from battery. NOTE">
2. Remove the center grille assembly. Air Vent Grille > REMOVAL">
3. Release the claws, and remove the switch - hazard from the center grille assembly.
Diagnostic procedure with phenomenon
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostics with PhenomenonDIAGNOSTIC PROCEDURE WITH PHENOMENON1. NOTHING IS DISPLAYED ON THE SCREEN. NO ILLUMINATION APPEARS ON THE INDICATORTrouble symptom:• When the AUTO button is pressed with IGN ON, nothing is displayed on the screen or indicator ...
Inspection
SECURITY AND LOCKS > Push Button Start SystemINSPECTION1. POWER SUPPLY SWITCH FUNCTION INSPECTION1. Check push button ignition switch function(1) Check the change control through push button ignition switch, brake pedal operation, and shift position.Shift lever positionBrake pedal operationPush b ...
Warning chimes and warning indicator of the keyless access with push-button
start system (if equipped)
Access key warning indicator (type A)
Access key warning indicator (type B)
The warning chime and the access key
warning indicator are used for the following
purposes.
Minimizing improper operations when
using the keyless access with push-button
start system
Helping protect you ...