Subaru Crosstrek Service Manual: Removal
LIGHTING SYSTEM > Front Turn Signal Light Bulb
REMOVAL
1. Disconnect the ground cable from battery. NOTE">
2. Turn the steering wheel in the opposite direction from the parts to be removed. Then remove the clips and turn over the mud guard - front.
3. Remove the bulb socket and front turn signal light bulb.
CAUTION:
Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.
Inspection
LIGHTING SYSTEM > Front Turn Signal Light BulbINSPECTION1. Visually check the bulb for blow out.2. Check the bulb specification. General Description > SPECIFICATION">3. Replace the bulb ...
Installation
LIGHTING SYSTEM > Front Turn Signal Light BulbINSTALLATIONInstall each part in the reverse order of removal. ...
Other materials:
Inspection
COMMUNICATION SYSTEM > Horn SystemINSPECTIONSymptomsInspection stepsHorn does not sound1. Check the fuse.2. Check the horn relay.3. Check the role connector.4. Check the horn switch.5. Check the horn assembly.6. Check the harness. ...
Light control switch
CAUTION
Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
Before leaving the vehicle, make
sure that the lights are turned off.
If the vehicle is left unattended
for a long time with the lights
illuminated, the batte ...
Front differential assembly Note
DIFFERENTIALS > Front Differential AssemblyNOTE1. CVT MODELFor front differential for the CVT model, refer to the “CVT (TR580)” section. Front Differential Assembly">2. 5MT MODELFor front differential for the 5MT model, refer to the “5MT” section. Front Different ...
