Subaru Crosstrek Service Manual: Removal
INTAKE (INDUCTION)(H4DO) > Air Cleaner Element
REMOVAL
1. Disconnect the ground cable from battery. NOTE">
2. Remove the air intake duct. Air Intake Duct > REMOVAL">
3. Disconnect the connector (A) from the mass air flow and intake air temperature sensor, and remove the clip (B).
4. Loosen the clamp (A) which secures the air intake boot to the air cleaner case (rear), and then remove the clip (B) from the air cleaner case (front).
5. Remove the air cleaner case (rear) and air cleaner element.
Inspection
INTAKE (INDUCTION)(H4DO) > Air Cleaner ElementINSPECTION1. Check that the air cleaner element has no deformation, cracks or other damages.2. Check the air cleaner element for excessive dirt.3. Repl ...
Installation
INTAKE (INDUCTION)(H4DO) > Air Cleaner ElementINSTALLATIONInstall in the reverse order of removal.CAUTION:Be sure to use SUBARU genuine air cleaner element depending on the engine type when replaci ...
Other materials:
Inspection
LUBRICATION(H4DO) > Engine OilINSPECTIONCAUTION:If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emitting smoke or causing a fire.1. Park the vehicle on a level surface.2. Turn the ignition switch to OFF.3. Remove the oil level gauge and wipe away t ...
Unlocking the doors
Press the unlock/disarm button to unlock
the driver's door. An electronic chirp will
sound twice and the hazard warning
flashers will flash twice. To unlock all
doors and the rear gate, briefly press the
unlock/disarm button a second time within
5 seconds.
NOTE
If the interval between the fi ...
Removal
SECURITY AND LOCKS > IG Relay1 (Push Button Start)REMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Disconnect the ground cable from battery ...
