INSTRUMENTATION/DRIVER INFO > Multi-function Display (MFD)
REMOVAL
1. MULTI FUNCTION DISPLAY
1. Disconnect the ground cable from battery. NOTE">
2. Remove the center grille assembly. Air Vent Grille > REMOVAL">
3. Release the claw and hook, and then remove the cover center UPR.
NOTE:
Lightly push up the back of the cover center UPR, hook the finger to the end portion and pull it toward you to remove it.
4. Remove the multi-function display.
CAUTION:
Be careful not to damage the multi-function display or instrument panel.
(1) Release the screws and claws.
(2) Pull the multi-function display assembly toward you, and disconnect the connector.
(3) Remove the screw, and remove the multi-function display from the panel - display.
2. MULTI-FUNCTION DISPLAY SWITCH
1. Disconnect the ground cable from battery. NOTE">
2. Remove the center grille assembly. Air Vent Grille > REMOVAL">
3. Release the claws and remove the switch - multi-function display.
Removal
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF) > Sunroof SwitchREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the light assembly - map. (Models without EyeSight) Spot Map Light > REMOVAL">3. Remove the stereo camera cover assembly. (Models with EyeSight) Stereo ...
Preparation tool
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > General DescriptionPREPARATION TOOL1. GENERAL TOOLTOOL NAMEREMARKSCircuit testerUsed for measuring resistance, voltage and current. ...
Installation
AIRBAG SYSTEM > Satellite Safing SensorINSTALLATIONCAUTION:• Do not reuse the bolt and nut.Always replace with the specified new bolts and nuts.• When installing the cover - satellite safing, push the cover securely until it contacts the floor panel.• If the cover - satellite sa ...