Subaru Crosstrek Service Manual: Removal
INSTRUMENTATION/DRIVER INFO > Combination Meter
REMOVAL
1. Disconnect the ground cable from battery. NOTE">
2. Release the lock, tilt the steering column to the lowest end and fully extend the column by the telescopic system.
3. Release the screws, clips and claws, and remove the visor - combination meter.
4. Remove the combination meter assembly.
CAUTION:
• Be careful not to damage the meter or instrument panel.
• Pay particular attention to avoid damaging the meter glass.
(1) Remove the screws.
(2) Pull the combination meter assembly toward you and disconnect the connector.
Assembly
INSTRUMENTATION/DRIVER INFO > Combination MeterASSEMBLYAssemble each part in the reverse order of disassembly. ...
Disassembly
INSTRUMENTATION/DRIVER INFO > Combination MeterDISASSEMBLYCAUTION:• Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.• Be careful not to apply ...
Other materials:
Clear memory mode Operation
EyeSight (DIAGNOSTICS) > Clear Memory ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Select System» display, select «EyeSigh ...
Dtc b1620 side airbag sensor rh failure
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1620 SIDE AIRBAG SENSOR RH FAILUREDIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Side airbag sensor (RH) is faulty.When DTC B1620 is displayed, the circuit within the side airbag sensor (RH) i ...
Dtc u0140 lost communication with body control module
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0140 LOST COMMUNICATION WITH BODY CONTROL MODULEDetected when CAN data from BIU does not arrive.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE"> ...
