Subaru Crosstrek Service Manual: Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Power Transistor (Auto A/C Model)
REMOVAL
1. Disconnect the ground cable from battery. NOTE">
2. Remove the glove box. Glove Box > REMOVAL">
3. Remove the screws and remove the duct - foot RH.
NOTE:
Remove the connector and harness clip of the motor - actuator mix RH, and move the harness aside.
4. Remove the power transistor.
(1) Disconnect the connector.
(2) Remove the power transistor while pressing the power transistor claw part and sliding it.
Installation
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Power Transistor (Auto A/C Model)INSTALLATIONInstall each part in the reverse order of removal. ...
Other materials:
Airbag connector Procedure
AIRBAG SYSTEM > Airbag ConnectorPROCEDURE1. POWER SUPPLY1. How to disconnect:CAUTION:When pulling the slide lock or disconnecting connector, be sure to hold the connector, not the harness.(1) Push the lock (a).(2) While holding down the lock (a), disconnect the connector.2. How to connect:CAUTION ...
Hands-free phone system
The hands-free system enables calls to be
made and received without having to take
your hands off the steering wheel.
This system supports Bluetooth. Bluetooth
is a wireless data system that enables cell
phones to be used without being connected
by a cable or placed in a cradle.
The opera ...
Basic diagnostic procedure Procedure
AIRBAG SYSTEM (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURESTEPCHECKYESNO1.CHECK WARNING LIGHT.Check whether the airbag warning light in the combination meter is lit.Does the airbag warning light illuminate? Basic Diagnostic Procedure > PROCEDURE">Go to Step 2.Perform the diagnos ...
