Subaru Crosstrek Service Manual: Removal

CAUTION:

Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">

1. Using the refrigerant recovery system, discharge refrigerant. Refrigerant Recovery Procedure > PROCEDURE">

2. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. NOTE">

3. Drain the coolant from the radiator. Engine Coolant > REPLACEMENT">

4. Remove the heater and cooling unit assembly. Heater and Cooling Unit > REMOVAL">

5. Remove the heater core.

(1) Remove the screw and detach the clamp - pipe.

(2) Remove the screws and detach the cover - heater pipe.

(3) Remove the clamp, and remove the pipe - inlet and outlet.

(4) Remove the screws and detach the plate - heater core.

(5) Pull out the heater core from the case - heater unit.

Installation

Heater duct

Other materials:

Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Heater and Cooling UnitREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Disconnect the ground ca ...

Installation
BRAKE > Rear Brake PadINSTALLATIONNOTE:Before installation, remove mud and foreign matter from the caliper body assembly and support - rear disc brake.1. Before installation, check the brake pad. Rear Brake Pad > INSPECTION">2. Apply a thin coat of grease to the pad clip.Preparation i ...

Basic operation
By operating "  " or "  " of the control switch, the screens and selection items can be switched. When the " /SET" switch is pulled toward you, the item can be selected and set. If there are some useful messages, such as vehicle information, warning information, etc., they wi ...