HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Compressor
REMOVAL
1. CROSSTREK MODEL
1. Perform compressor oil return operation. Compressor Oil > PROCEDURE">
2. Turn the A/C switch to OFF, and turn the ignition switch to OFF.
3. Using the refrigerant recovery system, discharge refrigerant. Refrigerant Recovery Procedure > PROCEDURE">
4. Disconnect the ground cable from battery.
5. Remove the V-belts. V-belt > REMOVAL">
6. Remove the harness clips and bolts and remove the V-belt cover bracket.
7. Remove the bolt, and detach the hose - pressure suction and the hose - pressure discharge.
CAUTION:
Seal the disconnected hose and engaging part of compressor with a plug or vinyl tape to prevent foreign matter from entering.
8. Remove the compressor assembly.
(1) Disconnect the connector.
(2) Remove the bolts and remove the compressor assembly.
NOTE:
Tighten the engine hanger together with the compressor assembly.
Installation
POWER ASSISTED SYSTEM (POWER STEERING) > Steering WheelINSTALLATIONCAUTION:• Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">• If the steering w ...
Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Control Valve BodyREMOVALCAUTION:• Directly after the vehicle has been running or the engine has been idling for a long time, the CVTF is hot. Be careful not to burn yourself.• Be careful not to spill CVTF on the exhaust pipe to prevent it f ...
Remote engine start system Wiring diagram
WIRING SYSTEM > Remote Engine Start SystemWIRING DIAGRAM ...