GLASS/WINDOWS/MIRRORS > Rear Regulator and Motor Assembly
REMOVAL
1. Disconnect the ground cable from battery. NOTE">
2. Remove the trim panel - rear door. Door Trim > REMOVAL">
3. Remove the sealing cover - rear door. Rear Sealing Cover > REMOVAL">
4. Remove the glass assembly - rear door. Rear Door Glass > REMOVAL">
5. Remove the rear regulator and motor assembly.
(1) Disconnect the motor - rear connector.
(2) Remove the bolts, and then remove the rear regulator and motor assembly.
Rear wiring harness Location
WIRING SYSTEM > Rear Wiring HarnessLOCATIONConnectorConnecting toNo.PoleColorAreaNo.DescriptionR120C-1B97Bulkhead wiring harnessR320C-3B99R41BlackB-4 Parking brake switchR520C-3B92Bulkhead wiring harnessR93C-5 Front door switch LHR108B-5D22Rear door cord LHR123B-2 Front door switch RHR138B-3D28Re ...
Access key
Access key (main)
Access key (sub)
Key number plate
The vehicle has two access keys and a
key number plate. For details about the
key number plate, refer to "Key number
plate" 2-3.
A mechanical key is attached to each
access key. The mechanical key is used
for the following opera ...
Dtc u0164 lost communication with hvac control module
LAN SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0164 LOST COMMUNICATION WITH HVAC CONTROL MODULEDTC DETECTING CONDITION:No data is received from A/C control panel.TROUBLE SYMPTOM:Cooperation control of air conditioner does not operate properly.STEPCHECKYESNO ...