FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Level Sensor
REMOVAL
WARNING:
Place “NO OPEN FLAMES” signs near the working area.
CAUTION:
• Be careful not to spill fuel.
• If the fuel gauge indicates that two thirds or more of the fuel is remaining, be sure to drain fuel before starting work to avoid the fuel to spill.
NOTE:
The fuel level sensor is built in fuel pump assembly.
1. Remove the fuel pump assembly. Fuel Pump > REMOVAL">
2. Disconnect the fuel level sensor connector (A), and pull out the connector cable and fuel level sensor harness from the clip.
3. While pressing the claw (A) of the fuel level sensor, slide the fuel level sensor in the direction of the arrow, and remove the fuel level sensor.
Dtc b2788 ign signal correlation (steering lock cm)
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2788 IGN SIGNAL CORRELATION (STEERING LOCK CM)DTC detecting condition:When mismatch occurs in the IG1 input of the steering lock CM for both LIN communication line input (IG1 i ...
Light control and wiper control levers/switches
Windshield wiper
Mist
Windshield washer
Rear window wiper and washer switch
Wiper intermittent time control switch
Wiper control lever
Light control switch
Fog light switch
Headlight ON/OFF/AUTO
Headlight flasher High/Low beam
Turn signal lever
...
Fastening the seatbelt
WARNING
Never use a belt that is twisted or
reversed. In an accident, this can
increase the risk or severity of
injury.
Keep the lap belt as low as
possible on your hips. In a collision,
this spreads the force of the
lap belt over stronger hip bones
instead of across the weaker
...