Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Removal

FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Delivery and Evaporation Lines

REMOVAL

WARNING:

Place “NO OPEN FLAMES” signs near the working area.

CAUTION:

Be careful not to spill fuel.

1. Release the fuel pressure. Fuel > PROCEDURE">

2. Open the fuel filler lid and remove the fuel filler cap.

NOTE:

This operation is required to release the inner pressure of the fuel tank.

3. Remove the floor mat. Floor Mat > REMOVAL">

4. In the engine compartment, disconnect the fuel delivery tube (A) and evaporation hose (B).

CAUTION:

Be careful not to spill fuel.

Catch the fuel from the tubes using a container or cloth.

NOTE:

Disconnect the quick connector as shown in the figure.

(a)

Slider

5. Remove the fuel tank. Fuel Tank > REMOVAL">

6. Disconnect the quick connector, and remove the fuel delivery tube and jet pump tube from the fuel tank.

CAUTION:

Be careful not to spill fuel.

Catch the fuel from the tubes using a container or cloth.

NOTE:

Disconnect the quick connector as shown in the figure.

(a)

Slider

7. Disconnect the quick connector and remove the purge pipe.

NOTE:

Disconnect the quick connector as shown in the figure.

8. Remove the fuel pipe assembly from vehicle.

Inspection
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Delivery and Evaporation LinesINSPECTION1. Check that the fuel pipe has no deformation, cracks or other damages.2. Check that the hose and tube have no cr ...

Installation
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Delivery and Evaporation LinesINSTALLATIONInstall in the reverse order of removal while being careful of the following.NOTE:When connecting the fuel deliv ...

Other materials:

Dtc c2514 torque sensor power supply
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2514 TORQUE SENSOR POWER SUPPLYTrouble symptom:• The steering wheel operation feels heavy.• STEERING warning light illuminates.Wiring diagram:Electric power steering syst ...

Dtc c1423 different ecu specifications
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1423 DIFFERENT ECU SPECIFICATIONSDTC detecting condition:Different control module specificationTrouble symptom:• ABS does not operate.• VDC does not operate.• Hill start as ...

Inspection
ENTERTAINMENT > Audio SystemINSPECTION1. BASIC INSPECTIONModel with 6.2 inch display1. Using the Check List for Interview, ask the customer the condition of how the trouble occurred. Check List for Interview > CHECK">2. Check the battery. Battery > INSPECTION">3. Check the ...

© 2016-2024 Copyright www.sucross.com