FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Electronic Throttle Control Relay
REMOVAL
1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work.
2. Release the lock and remove the fuse holder from the relay & fuse box.
3. Disconnect the connectors from the relay & fuse box.
4. Remove the bolts (A) and nuts (B), and remove the relay & fuse box.
5. Remove the electronic throttle control relay from the relay block on the back side of the fuse block.
Check eyesight steering switch
EyeSight (DIAGNOSTICS) > Diagnostics with PhenomenonCHECK EyeSight STEERING SWITCHTrouble symptom:• Cruise control cannot be set. (Cancelled immediately.)• Cruise control cannot be released.Wiring diagram:EyeSight System EyeSight System > WIRING DIAGRAM">STEPCHECKYESNO1.CH ...
Electronic Brake Force Distribution (EBD) system
The EBD system maximizes the effectiveness
of the brakes by allowing the rear
brakes to supply a greater proportion of
the braking force. It functions by adjusting
the distribution of braking force to the rear
wheels in accordance with the vehicle's
loading condition and speed.
The EBD syst ...
Shifting speeds
Recommended shifting speeds
The best compromise between fuel economy
and vehicle performance during
normal driving is ensured by shifting up
at the speeds listed in the following table.
Maximum allowable speeds
The following table shows the maximum
speeds that are possible with each differe ...