Subaru Crosstrek Service Manual: Removal

1. Pull both sides of the cap (a) using a flat tip screwdriver or similar tool wrapped with a protection tape.

2. Pull the assist grip toward yourself (toward the vehicle center) to remove.

Installation

Center console

Other materials:

Removal
ENTERTAINMENT > Switches and HarnessREMOVAL1. SATELLITE SWITCH ASSEMBLYCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Set the tire to the straig ...

Installation
SEATS > Rear SeatINSTALLATIONInstall each part in the reverse order of removal.NOTE:• After installing the backrest assembly, make sure that each seat belt operates normally.• Make sure that they are properly secured on each hook on the vehicle side.Tightening torque:Refer to “C ...

Preparation for car settings
1. Turn the ignition switch to the "ON" position. 2. Push and hold the button to show the selection screen. 3. After the selection screen is displayed, operate the " " or " " switch to show the "Car Setting" item. Then, push the button. ...