Subaru Crosstrek Service Manual: Removal
EXTERIOR BODY PANELS > Front Fender
REMOVAL
1. Disconnect the ground cable from battery. NOTE">
2. Remove the bumper face - front. Front Bumper > REMOVAL">
3. Remove the light assembly - head. Headlight Assembly > REMOVAL">
4. Remove the cover - front fender.
(1) Remove the clip.
(2) Release the claws by pulling them forward, and remove the cover - front fender.
5. Remove the clips and detach the side garnish assembly. Side Garnish > REMOVAL">
6. Remove the mud guard - front. Mud Guard > REMOVAL">
7. Remove the cover - A pillar assembly.
8. Remove the fender COMPL - front.
(1) Remove the garnish assembly - front fender.
CAUTION:
Do not reuse the garnish assembly - front fender. Always replace with a new part.
(2) Remove the bolts, and remove the fender COMPL - front.
Installation
EXTERIOR BODY PANELS > Front FenderINSTALLATION1. Install each part in the reverse order of removal.CAUTION:• Install the bumper face - front so that the front end of the under cover (b) come ...
Front hood
...
Other materials:
Operation
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Read Current DataOPERATION1. COMBINATION METER1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».3. On «Main Menu» display, select «Each System».4. On «Se ...
Inspection
SECURITY AND LOCKS > Rear Lock ButtonINSPECTION1. Using the Subaru Select Monitor, display «Rear gate/Trunk UNLOCK output» from «Data monitor».2. Check if the display changes when the rear lock button is operated.3. If the display is not correct as the result of inspection, refer to “Ge ...
Inspection
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Tire Pressure Warning Light / Trouble Indicator Light Illumination PatternINSPECTION(1)Ignition switch(8)Tire inflation pressure warning light (pressure condition)(15)Light OFF(2)OFF(9)Light OFF(16)Blink(3)ON(10)Light ON(17)1 second(4)Start(11)Syste ...
